# NOTE: Make sure to (re-)format this file on changes with `nixpkgs-fmt`! { stdenv, lib, nixosTests, pkgsCross, fetchFromGitHub, fetchpatch, fetchzip, buildPackages, makeBinaryWrapper, ninja, meson, m4, pkg-config, coreutils, gperf, getent, glibcLocales, # glib is only used during tests (test-bus-gvariant, test-bus-marshal) glib, gettext, python3Packages, # Mandatory dependencies libcap, util-linux, kbd, kmod, libxcrypt, # Optional dependencies pam, cryptsetup, audit, acl, lz4, libgcrypt, libgpg-error, libidn2, curl, gnutar, gnupg, zlib, xz, zstd, tpm2-tss, libuuid, libapparmor, intltool, bzip2, pcre2, elfutils, linuxHeaders ? stdenv.cc.libc.linuxHeaders, gnutls, iptables, withSelinux ? false, libselinux, withLibseccomp ? lib.meta.availableOn stdenv.hostPlatform libseccomp, libseccomp, withKexectools ? lib.meta.availableOn stdenv.hostPlatform kexec-tools, kexec-tools, bashInteractive, bash, libmicrohttpd, libfido2, p11-kit, libpwquality, qrencode, # the (optional) BPF feature requires bpftool, libbpf, clang and llvm-strip to # be available during build time. # Only libbpf should be a runtime dependency. # Note: llvmPackages is explicitly taken from buildPackages instead of relying # on splicing. Splicing will evaluate the adjacent (pkgsHostTarget) llvmPackages # which is sometimes problematic: llvmPackages.clang looks at targetPackages.stdenv.cc # which, in the unfortunate case of pkgsCross.ghcjs, `throw`s. If we # explicitly take buildPackages.llvmPackages, this is no problem because # `buildPackages.targetPackages.stdenv.cc == stdenv.cc` relative to # us. Working around this is important, because systemd is in the dependency # closure of GHC via emscripten and jdk. bpftools, libbpf, # Needed to produce a ukify that works for cross compiling UKIs. targetPackages, withAcl ? true, withAnalyze ? true, withApparmor ? true, withAudit ? true, # compiles systemd-boot, assumes EFI is available. withBootloader ? withEfi && !stdenv.hostPlatform.isMusl # "Unknown 64-bit data model" && !stdenv.hostPlatform.isRiscV32, # adds bzip2, lz4, xz and zstd withCompression ? true, withCoredump ? true, withCryptsetup ? true, withRepart ? true, withDocumentation ? true, withEfi ? stdenv.hostPlatform.isEfi, withFido2 ? true, # conflicts with the NixOS /etc management withFirstboot ? false, withHomed ? !stdenv.hostPlatform.isMusl, withHostnamed ? true, withHwdb ? true, withImportd ? !stdenv.hostPlatform.isMusl, withIptables ? true, withKmod ? true, withLibBPF ? lib.versionAtLeast buildPackages.llvmPackages.clang.version "10.0" # assumes hard floats && (stdenv.hostPlatform.isAarch -> lib.versionAtLeast stdenv.hostPlatform.parsed.cpu.version "6") # see https://github.com/NixOS/nixpkgs/pull/194149#issuecomment-1266642211 && !stdenv.hostPlatform.isMips64 # can't find gnu/stubs-32.h && (stdenv.hostPlatform.isPower64 -> stdenv.hostPlatform.isBigEndian) # https://reviews.llvm.org/D43106#1019077 && (stdenv.hostPlatform.isRiscV32 -> stdenv.cc.isClang) # buildPackages.targetPackages.llvmPackages is the same as llvmPackages, # but we do it this way to avoid taking llvmPackages as an input, and # risking making it too easy to ignore the above comment about llvmPackages. && lib.meta.availableOn stdenv.hostPlatform buildPackages.targetPackages.llvmPackages.compiler-rt, withLibidn2 ? true, withLocaled ? true, withLogind ? true, withMachined ? true, withNetworkd ? true, withNss ? !stdenv.hostPlatform.isMusl, withOomd ? true, withPam ? true, withPasswordQuality ? true, withPCRE2 ? true, withPolkit ? true, withPortabled ? !stdenv.hostPlatform.isMusl, withQrencode ? true, withRemote ? !stdenv.hostPlatform.isMusl, withResolved ? true, withShellCompletions ? true, withSysusers ? true, withSysupdate ? true, withTimedated ? true, withTimesyncd ? true, withTpm2Tss ? true, # adds python to closure which is too much by default withUkify ? false, withUserDb ? true, withUtmp ? !stdenv.hostPlatform.isMusl, withVmspawn ? true, # kernel-install shouldn't usually be used on NixOS, but can be useful, e.g. for # building disk images for non-NixOS systems. To save users from trying to use it # on their live NixOS system, we disable it by default. withKernelInstall ? false, # tests assume too much system access for them to be feasible for us right now withTests ? false, # build only libudev and libsystemd buildLibsOnly ? false, # yes, pname is an argument here pname ? "systemd", libxslt, docbook_xsl, docbook_xml_dtd_42, docbook_xml_dtd_45, withLogTrace ? false, }: assert withImportd -> withCompression; assert withCoredump -> withCompression; assert withHomed -> withCryptsetup; assert withHomed -> withPam; assert withUkify -> (withEfi && withBootloader); assert withRepart -> withCryptsetup; assert withBootloader -> withEfi; let wantCurl = withRemote || withImportd; wantGcrypt = withResolved || withImportd; version = "255.4"; # Use the command below to update `releaseTimestamp` on every (major) version # change. More details in the commentary at mesonFlags. # command: # $ curl -s https://api.github.com/repos/systemd/systemd/releases/latest | \ # jq '.created_at|strptime("%Y-%m-%dT%H:%M:%SZ")|mktime' releaseTimestamp = "1701895110"; in stdenv.mkDerivation (finalAttrs: { inherit pname version; # We use systemd/systemd-stable for src, and ship NixOS-specific patches inside nixpkgs directly # This has proven to be less error-prone than the previous systemd fork. src = fetchFromGitHub { owner = "systemd"; repo = "systemd-stable"; rev = "v${version}"; hash = "sha256-P1mKq+ythrv8MU7y2CuNtEx6qCDacugzfsPRZL+NPys="; }; # On major changes, or when otherwise required, you *must* : # 1. reformat the patches, # 2. `git am path/to/00*.patch` them into a systemd worktree, # 3. rebase to the more recent systemd version, # 4. and export the patches again via # `git -c format.signoff=false format-patch v${version} --no-numbered --zero-commit --no-signature`. # Use `find . -name "*.patch" | sort` to get an up-to-date listing of all # patches patches = [ ./0001-Start-device-units-for-uninitialised-encrypted-devic.patch ./0002-Don-t-try-to-unmount-nix-or-nix-store.patch ./0003-Fix-NixOS-containers.patch ./0004-Add-some-NixOS-specific-unit-directories.patch ./0005-Get-rid-of-a-useless-message-in-user-sessions.patch ./0006-hostnamed-localed-timedated-disable-methods-that-cha.patch ./0007-Change-usr-share-zoneinfo-to-etc-zoneinfo.patch ./0008-localectl-use-etc-X11-xkb-for-list-x11.patch ./0009-add-rootprefix-to-lookup-dir-paths.patch ./0010-systemd-shutdown-execute-scripts-in-etc-systemd-syst.patch ./0011-systemd-sleep-execute-scripts-in-etc-systemd-system-.patch ./0012-path-util.h-add-placeholder-for-DEFAULT_PATH_NORMAL.patch ./0013-inherit-systemd-environment-when-calling-generators.patch ./0014-core-don-t-taint-on-unmerged-usr.patch ./0015-tpm2_context_init-fix-driver-name-checking.patch ./0016-systemctl-edit-suggest-systemdctl-edit-runtime-on-sy.patch ./0017-meson.build-do-not-create-systemdstatedir.patch ] ++ lib.optional (stdenv.hostPlatform.isLinux && stdenv.hostPlatform.isGnu) [ ./0018-timesyncd-disable-NSCD-when-DNSSEC-validation-is-dis.patch ] ++ lib.optional (stdenv.hostPlatform.isPower || stdenv.hostPlatform.isRiscV || stdenv.hostPlatform.isMips) [ # Fixed upstream and included in the main and stable branches. Can be dropped # when bumping to >= v255.5. # https://github.com/systemd/systemd/issues/30448 # https://github.com/NixOS/nixpkgs/pull/282607 (fetchpatch { url = "https://github.com/systemd/systemd/commit/8040fa55a1cbc34dede3205a902095ecd26c21e3.patch"; sha256 = "0c6z7bsndbkb8m130jnjpsl138sfv3q171726n5vkyl2n9ihnavk"; }) ] ++ lib.optional stdenv.hostPlatform.isMusl ( let oe-core = fetchzip { url = "https://git.openembedded.org/openembedded-core/snapshot/openembedded-core-6fdf03bd950e55ef7881041606f6e76141033716.tar.gz"; sha256 = "/+9aJdOxBY8Y4vJPftOCxmyK8L2nvR82KmJxil1a2aY="; }; musl-patches = oe-core + "/meta/recipes-core/systemd/systemd"; in [ (musl-patches + "/0017-Adjust-for-musl-headers.patch") (musl-patches + "/0016-pass-correct-parameters-to-getdents64.patch") (musl-patches + "/0018-test-bus-error-strerror-is-assumed-to-be-GNU-specifi.patch") (musl-patches + "/0001-missing_type.h-add-comparison_fn_t.patch") (musl-patches + "/0002-add-fallback-parse_printf_format-implementation.patch") (musl-patches + "/0003-src-basic-missing.h-check-for-missing-strndupa.patch") (musl-patches + "/0004-don-t-fail-if-GLOB_BRACE-and-GLOB_ALTDIRFUNC-is-not-.patch") (musl-patches + "/0005-add-missing-FTW_-macros-for-musl.patch") (musl-patches + "/0006-Use-uintmax_t-for-handling-rlim_t.patch") (musl-patches + "/0007-don-t-pass-AT_SYMLINK_NOFOLLOW-flag-to-faccessat.patch") (musl-patches + "/0008-Define-glibc-compatible-basename-for-non-glibc-syste.patch") (musl-patches + "/0009-Do-not-disable-buffering-when-writing-to-oom_score_a.patch") (musl-patches + "/0010-distinguish-XSI-compliant-strerror_r-from-GNU-specif.patch") (musl-patches + "/0011-avoid-redefinition-of-prctl_mm_map-structure.patch") (musl-patches + "/0012-do-not-disable-buffer-in-writing-files.patch") (musl-patches + "/0013-Handle-__cpu_mask-usage.patch") (musl-patches + "/0014-Handle-missing-gshadow.patch") (musl-patches + "/0015-missing_syscall.h-Define-MIPS-ABI-defines-for-musl.patch") (musl-patches + "/0020-sd-event-Make-malloc_trim-conditional-on-glibc.patch") (musl-patches + "/0021-shared-Do-not-use-malloc_info-on-musl.patch") (musl-patches + "/0022-avoid-missing-LOCK_EX-declaration.patch") ] ); postPatch = '' substituteInPlace src/basic/path-util.h --replace "@defaultPathNormal@" "${placeholder "out"}/bin/" '' + lib.optionalString withLibBPF '' substituteInPlace meson.build \ --replace "find_program('clang'" "find_program('${stdenv.cc.targetPrefix}clang'" '' + lib.optionalString withUkify '' substituteInPlace src/ukify/ukify.py \ --replace \ "'readelf'" \ "'${targetPackages.stdenv.cc.bintools.targetPrefix}readelf'" \ --replace \ "/usr/lib/systemd/boot/efi" \ "$out/lib/systemd/boot/efi" '' + ( let # The following patches references to dynamic libraries to ensure that all # the features that are implemented via dlopen(3) are available (or # explicitly deactivated) by pointing dlopen to the absolute store path # instead of relying on the linkers runtime lookup code. # # All of the shared library references have to be handled. When new ones # are introduced by upstream (or one of our patches) they must be # explicitly declared, otherwise the build will fail. # # As of systemd version 247 we've seen a few errors like `libpcre2.… not # found` when using e.g. --grep with journalctl. Those errors should # become less unexpected now. # # There are generally two classes of dlopen(3) calls. Those that we want # to support and those that should be deactivated / unsupported. This # change enforces that we handle all dlopen calls explicitly. Meaning: # There is not a single dlopen call in the source code tree that we did # not explicitly handle. # # In order to do this we introduced a list of attributes that maps from # shared object name to the package that contains them. The package can be # null meaning the reference should be nuked and the shared object will # never be loadable during runtime (because it points at an invalid store # path location). # # To get a list of dynamically loaded libraries issue something like # `grep -ri '"lib[a-zA-Z0-9-]*\.so[\.0-9a-zA-z]*"'' $src` # and update the list below. dlopenLibs = let opt = condition: pkg: if condition then pkg else null; in [ # bpf compilation support. We use libbpf 1 now. { name = "libbpf.so.1"; pkg = opt withLibBPF libbpf; } { name = "libbpf.so.0"; pkg = null; } # We did never provide support for libxkbcommon { name = "libxkbcommon.so.0"; pkg = null; } # qrencode { name = "libqrencode.so.4"; pkg = opt withQrencode qrencode; } { name = "libqrencode.so.3"; pkg = null; } # Password quality # We currently do not package passwdqc, only libpwquality. { name = "libpwquality.so.1"; pkg = opt withPasswordQuality libpwquality; } { name = "libpasswdqc.so.1"; pkg = null; } # Only include cryptsetup if it is enabled. We might not be able to # provide it during "bootstrap" in e.g. the minimal systemd build as # cryptsetup has udev (aka systemd) in it's dependencies. { name = "libcryptsetup.so.12"; pkg = opt withCryptsetup cryptsetup; } # We are using libidn2 so we only provide that and ignore the others. # Systemd does this decision during configure time and uses ifdef's to # enable specific branches. We can safely ignore (nuke) the libidn "v1" # libraries. { name = "libidn2.so.0"; pkg = opt withLibidn2 libidn2; } { name = "libidn.so.12"; pkg = null; } { name = "libidn.so.11"; pkg = null; } # journalctl --grep requires libpcre so let's provide it { name = "libpcre2-8.so.0"; pkg = pcre2; } # Support for TPM2 in systemd-cryptsetup, systemd-repart and systemd-cryptenroll { name = "libtss2-esys.so.0"; pkg = opt withTpm2Tss tpm2-tss; } { name = "libtss2-rc.so.0"; pkg = opt withTpm2Tss tpm2-tss; } { name = "libtss2-mu.so.0"; pkg = opt withTpm2Tss tpm2-tss; } { name = "libtss2-tcti-"; pkg = opt withTpm2Tss tpm2-tss; } { name = "libfido2.so.1"; pkg = opt withFido2 libfido2; } # inspect-elf support { name = "libelf.so.1"; pkg = opt withCoredump elfutils; } { name = "libdw.so.1"; pkg = opt withCoredump elfutils; } # Support for PKCS#11 in systemd-cryptsetup, systemd-cryptenroll and systemd-homed { name = "libp11-kit.so.0"; pkg = opt (withHomed || withCryptsetup) p11-kit; } { name = "libip4tc.so.2"; pkg = opt withIptables iptables; } ]; patchDlOpen = dl: let library = "${lib.makeLibraryPath [ dl.pkg ]}/${dl.name}"; in if dl.pkg == null then '' # remove the dependency on the library by replacing it with an invalid path for file in $(grep -lr '"${dl.name}"' src); do echo "patching dlopen(\"${dl.name}\", …) in $file to an invalid store path ("${builtins.storeDir}/eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee-not-implemented/${dl.name}")…" substituteInPlace "$file" --replace '"${dl.name}"' '"${builtins.storeDir}/eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee-not-implemented/${dl.name}"' done '' else '' # ensure that the library we provide actually exists if ! [ -e ${library} ]; then # exceptional case, details: # https://github.com/systemd/systemd-stable/blob/v249-stable/src/shared/tpm2-util.c#L157 if ! [[ "${library}" =~ .*libtss2-tcti-$ ]]; then echo 'The shared library `${library}` does not exist but was given as substitute for `${dl.name}`' exit 1 fi fi # make the path to the dependency explicit for file in $(grep -lr '"${dl.name}"' src); do echo "patching dlopen(\"${dl.name}\", …) in $file to ${library}…" substituteInPlace "$file" --replace '"${dl.name}"' '"${library}"' done ''; in # patch all the dlopen calls to contain absolute paths to the libraries lib.concatMapStringsSep "\n" patchDlOpen dlopenLibs ) # finally ensure that there are no left-over dlopen calls (or rather strings # pointing to shared libraries) that we didn't handle + '' if grep -qr '"lib[a-zA-Z0-9-]*\.so[\.0-9a-zA-z]*"' src; then echo "Found unhandled dynamic library calls: " grep -r '"lib[a-zA-Z0-9-]*\.so[\.0-9a-zA-z]*"' src exit 1 fi '' # Finally, patch shebangs in scripts used at build time. This must not patch # scripts that will end up in the output, to avoid build platform references # when cross-compiling. + '' shopt -s extglob patchShebangs tools test src/!(rpm|kernel-install|ukify) src/kernel-install/test-kernel-install.sh ''; outputs = [ "out" "dev" ] ++ (lib.optional (!buildLibsOnly) "man"); hardeningDisable = [ # https://gcc.gnu.org/bugzilla/show_bug.cgi?id=111523 "trivialautovarinit" ]; nativeBuildInputs = [ pkg-config makeBinaryWrapper gperf ninja meson glibcLocales getent m4 intltool gettext libxslt docbook_xsl docbook_xml_dtd_42 docbook_xml_dtd_45 bash (buildPackages.python3Packages.python.withPackages ( ps: with ps; [ lxml jinja2 ] ++ lib.optional withEfi ps.pyelftools )) ] ++ lib.optionals withLibBPF [ bpftools buildPackages.llvmPackages.clang buildPackages.llvmPackages.libllvm ]; buildInputs = [ libxcrypt libcap libuuid linuxHeaders bashInteractive # for patch shebangs ] ++ lib.optionals wantGcrypt [ libgcrypt libgpg-error ] ++ lib.optional withTests glib ++ lib.optional withAcl acl ++ lib.optional withApparmor libapparmor ++ lib.optional withAudit audit ++ lib.optional wantCurl (lib.getDev curl) ++ lib.optionals withCompression [ zlib bzip2 lz4 xz zstd ] ++ lib.optional withCoredump elfutils ++ lib.optional withCryptsetup (lib.getDev cryptsetup.dev) ++ lib.optional withKexectools kexec-tools ++ lib.optional withKmod kmod ++ lib.optional withLibidn2 libidn2 ++ lib.optional withLibseccomp libseccomp ++ lib.optional withIptables iptables ++ lib.optional withPam pam ++ lib.optional withPCRE2 pcre2 ++ lib.optional withSelinux libselinux ++ lib.optionals withRemote [ libmicrohttpd gnutls ] ++ lib.optionals (withHomed || withCryptsetup) [ p11-kit ] ++ lib.optionals (withHomed || withCryptsetup) [ libfido2 ] ++ lib.optionals withLibBPF [ libbpf ] ++ lib.optional withTpm2Tss tpm2-tss ++ lib.optional withUkify (python3Packages.python.withPackages (ps: with ps; [ pefile ])) ++ lib.optionals withPasswordQuality [ libpwquality ] ++ lib.optionals withQrencode [ qrencode ]; mesonBuildType = "release"; mesonFlags = [ # Options # We bump this attribute on every (major) version change to ensure that we # have known-good value for a timestamp that is in the (not so distant) # past. This serves as a lower bound for valid system timestamps during # startup. Systemd will reset the system timestamp if this date is +- 15 # years from the system time. # See the systemd v250 release notes for further details: # https://github.com/systemd/systemd/blob/60e930fc3e6eb8a36fbc184773119eb8d2f30364/NEWS#L258-L266 (lib.mesonOption "time-epoch" releaseTimestamp) (lib.mesonOption "version-tag" version) (lib.mesonOption "mode" "release") (lib.mesonOption "tty-gid" "3") # tty in NixOS has gid 3 (lib.mesonOption "debug-shell" "${bashInteractive}/bin/bash") (lib.mesonOption "pamconfdir" "${placeholder "out"}/etc/pam.d") # Use cgroupsv2. This is already the upstream default, but better be explicit. (lib.mesonOption "default-hierarchy" "unified") (lib.mesonOption "kmod-path" "${kmod}/bin/kmod") # D-Bus (lib.mesonOption "dbuspolicydir" "${placeholder "out"}/share/dbus-1/system.d") (lib.mesonOption "dbussessionservicedir" "${placeholder "out"}/share/dbus-1/services") (lib.mesonOption "dbussystemservicedir" "${placeholder "out"}/share/dbus-1/system-services") # pkgconfig (lib.mesonOption "pkgconfiglibdir" "${placeholder "dev"}/lib/pkgconfig") (lib.mesonOption "pkgconfigdatadir" "${placeholder "dev"}/share/pkgconfig") # Keyboard (lib.mesonOption "loadkeys-path" "${kbd}/bin/loadkeys") (lib.mesonOption "setfont-path" "${kbd}/bin/setfont") # SBAT (lib.mesonOption "sbat-distro" "nixos") (lib.mesonOption "sbat-distro-summary" "NixOS") (lib.mesonOption "sbat-distro-url" "https://nixos.org/") (lib.mesonOption "sbat-distro-pkgname" pname) (lib.mesonOption "sbat-distro-version" version) # Users (lib.mesonOption "system-uid-max" "999") (lib.mesonOption "system-gid-max" "999") # SysVinit (lib.mesonOption "sysvinit-path" "") (lib.mesonOption "sysvrcnd-path" "") # Login (lib.mesonOption "sulogin-path" "${util-linux.login}/bin/sulogin") (lib.mesonOption "nologin-path" "${util-linux.login}/bin/nologin") # Mount (lib.mesonOption "mount-path" "${lib.getOutput "mount" util-linux}/bin/mount") (lib.mesonOption "umount-path" "${lib.getOutput "mount" util-linux}/bin/umount") # Features # Tests (lib.mesonBool "tests" withTests) (lib.mesonEnable "glib" withTests) (lib.mesonEnable "dbus" withTests) # Compression (lib.mesonEnable "bzip2" withCompression) (lib.mesonEnable "lz4" withCompression) (lib.mesonEnable "xz" withCompression) (lib.mesonEnable "zstd" withCompression) (lib.mesonEnable "zlib" withCompression) # NSS (lib.mesonEnable "nss-mymachines" withNss) (lib.mesonEnable "nss-resolve" withNss) (lib.mesonBool "nss-myhostname" withNss) (lib.mesonBool "nss-systemd" withNss) # Cryptsetup (lib.mesonEnable "libcryptsetup" withCryptsetup) (lib.mesonEnable "libcryptsetup-plugins" withCryptsetup) (lib.mesonEnable "p11kit" (withHomed || withCryptsetup)) # FIDO2 (lib.mesonEnable "libfido2" withFido2) (lib.mesonEnable "openssl" withFido2) # Password Quality (lib.mesonEnable "pwquality" withPasswordQuality) (lib.mesonEnable "passwdqc" false) # Remote (lib.mesonEnable "remote" withRemote) (lib.mesonEnable "microhttpd" withRemote) (lib.mesonEnable "pam" withPam) (lib.mesonEnable "acl" withAcl) (lib.mesonEnable "audit" withAudit) (lib.mesonEnable "apparmor" withApparmor) (lib.mesonEnable "gcrypt" wantGcrypt) (lib.mesonEnable "importd" withImportd) (lib.mesonEnable "homed" withHomed) (lib.mesonEnable "polkit" withPolkit) (lib.mesonEnable "elfutils" withCoredump) (lib.mesonEnable "libcurl" wantCurl) (lib.mesonEnable "libidn" false) (lib.mesonEnable "libidn2" withLibidn2) (lib.mesonEnable "libiptc" withIptables) (lib.mesonEnable "repart" withRepart) (lib.mesonEnable "sysupdate" withSysupdate) (lib.mesonEnable "selinux" withSelinux) (lib.mesonEnable "tpm2" withTpm2Tss) (lib.mesonEnable "pcre2" withPCRE2) (lib.mesonEnable "bpf-framework" withLibBPF) (lib.mesonEnable "bootloader" withBootloader) (lib.mesonEnable "ukify" withUkify) (lib.mesonEnable "kmod" withKmod) (lib.mesonEnable "qrencode" withQrencode) (lib.mesonEnable "vmspawn" withVmspawn) (lib.mesonEnable "xenctrl" false) (lib.mesonEnable "gnutls" false) (lib.mesonEnable "xkbcommon" false) (lib.mesonEnable "man" true) (lib.mesonBool "analyze" withAnalyze) (lib.mesonBool "logind" withLogind) (lib.mesonBool "localed" withLocaled) (lib.mesonBool "hostnamed" withHostnamed) (lib.mesonBool "machined" withMachined) (lib.mesonBool "networkd" withNetworkd) (lib.mesonBool "oomd" withOomd) (lib.mesonBool "portabled" withPortabled) (lib.mesonBool "hwdb" withHwdb) (lib.mesonBool "timedated" withTimedated) (lib.mesonBool "timesyncd" withTimesyncd) (lib.mesonBool "userdb" withUserDb) (lib.mesonBool "coredump" withCoredump) (lib.mesonBool "firstboot" withFirstboot) (lib.mesonBool "resolve" withResolved) (lib.mesonBool "sysusers" withSysusers) (lib.mesonBool "efi" withEfi) (lib.mesonBool "utmp" withUtmp) (lib.mesonBool "log-trace" withLogTrace) (lib.mesonBool "kernel-install" withKernelInstall) (lib.mesonBool "quotacheck" false) (lib.mesonBool "ldconfig" false) (lib.mesonBool "install-sysconfdir" false) (lib.mesonBool "create-log-dirs" false) (lib.mesonBool "smack" true) (lib.mesonBool "b_pie" true) ] ++ lib.optionals (withShellCompletions == false) [ (lib.mesonOption "bashcompletiondir" "no") (lib.mesonOption "zshcompletiondir" "no") ] ++ lib.optionals stdenv.hostPlatform.isMusl [ (lib.mesonBool "gshadow" false) (lib.mesonBool "idn" false) ]; preConfigure = let # A list of all the runtime binaries referenced by the source code (plus # scripts and unit files) of systemd executables, tests and libraries. # As soon as a dependency is lo longer required we should remove it from # the list. # The `where` attribute for each of the replacement patterns must be # exhaustive. If another (unhandled) case is found in the source code the # build fails with an error message. binaryReplacements = [ { search = "/usr/bin/getent"; replacement = "${getent}/bin/getent"; where = [ "src/nspawn/nspawn-setuid.c" ]; } { search = "/sbin/mkswap"; replacement = "${lib.getBin util-linux}/sbin/mkswap"; where = [ "man/systemd-makefs@.service.xml" ]; } { search = "/sbin/swapon"; replacement = "${lib.getOutput "swap" util-linux}/sbin/swapon"; where = [ "src/core/swap.c" "src/basic/unit-def.h" ]; } { search = "/sbin/swapoff"; replacement = "${lib.getOutput "swap" util-linux}/sbin/swapoff"; where = [ "src/core/swap.c" ]; } { search = "/bin/echo"; replacement = "${coreutils}/bin/echo"; where = [ "man/systemd-analyze.xml" "man/systemd.service.xml" "man/systemd-run.xml" "src/analyze/test-verify.c" "src/test/test-env-file.c" "src/test/test-fileio.c" "src/test/test-load-fragment.c" ]; } { search = "/bin/cat"; replacement = "${coreutils}/bin/cat"; where = [ "test/test-execute/exec-noexecpaths-simple.service" "src/journal/cat.c" ]; } { search = "/usr/lib/systemd/systemd-fsck"; replacement = "$out/lib/systemd/systemd-fsck"; where = [ "man/systemd-fsck@.service.xml" ]; } ] ++ lib.optionals withImportd [ { search = "\"gpg\""; replacement = "\\\"${gnupg}/bin/gpg\\\""; where = [ "src/import/pull-common.c" ]; } { search = "\"tar\""; replacement = "\\\"${gnutar}/bin/tar\\\""; where = [ "src/import/export-tar.c" "src/import/import-common.c" "src/import/import-tar.c" ]; ignore = [ # occurrences here refer to the tar sub command "src/sysupdate/sysupdate-resource.c" "src/sysupdate/sysupdate-transfer.c" "src/import/pull.c" "src/import/export.c" "src/import/import.c" "src/import/importd.c" # runs `tar` but also also creates a temporary directory with the string "src/import/pull-tar.c" ]; } ] ++ lib.optionals withKmod [ { search = "/sbin/modprobe"; replacement = "${lib.getBin kmod}/sbin/modprobe"; where = [ "units/modprobe@.service" ]; } ]; # { replacement, search, where, ignore } -> List[str] mkSubstitute = { replacement, search, where, ignore ? [ ], }: map (path: "substituteInPlace ${path} --replace '${search}' \"${replacement}\"") where; mkEnsureSubstituted = { replacement, search, where, ignore ? [ ], }: let ignore' = lib.concatStringsSep "|" ( ignore ++ [ "^test" "NEWS" ] ); in '' set +e search=$(grep '${search}' -r | grep -v "${replacement}" | grep -Ev "${ignore'}") set -e if [[ -n "$search" ]]; then echo "Not all references to '${search}' have been replaced. Found the following matches:" echo "$search" exit 1 fi ''; in '' mesonFlagsArray+=(-Dntp-servers="0.nixos.pool.ntp.org 1.nixos.pool.ntp.org 2.nixos.pool.ntp.org 3.nixos.pool.ntp.org") export LC_ALL="en_US.UTF-8"; ${lib.concatStringsSep "\n" (lib.flatten (map mkSubstitute binaryReplacements))} ${lib.concatMapStringsSep "\n" mkEnsureSubstituted binaryReplacements} substituteInPlace src/libsystemd/sd-journal/catalog.c \ --replace /usr/lib/systemd/catalog/ $out/lib/systemd/catalog/ substituteInPlace src/import/pull-tar.c \ --replace 'wait_for_terminate_and_check("tar"' 'wait_for_terminate_and_check("${gnutar}/bin/tar"' ''; # These defines are overridden by CFLAGS and would trigger annoying # warning messages postConfigure = '' substituteInPlace config.h \ --replace "POLKIT_AGENT_BINARY_PATH" "_POLKIT_AGENT_BINARY_PATH" \ --replace "SYSTEMD_BINARY_PATH" "_SYSTEMD_BINARY_PATH" \ --replace "SYSTEMD_CGROUP_AGENTS_PATH" "_SYSTEMD_CGROUP_AGENT_PATH" ''; env.NIX_CFLAGS_COMPILE = toString ( [ # Can't say ${polkit.bin}/bin/pkttyagent here because that would # lead to a cyclic dependency. "-UPOLKIT_AGENT_BINARY_PATH" "-DPOLKIT_AGENT_BINARY_PATH=\"/run/current-system/sw/bin/pkttyagent\"" # Set the release_agent on /sys/fs/cgroup/systemd to the # currently running systemd (/run/current-system/systemd) so # that we don't use an obsolete/garbage-collected release agent. "-USYSTEMD_CGROUP_AGENTS_PATH" "-DSYSTEMD_CGROUP_AGENTS_PATH=\"/run/current-system/systemd/lib/systemd/systemd-cgroups-agent\"" "-USYSTEMD_BINARY_PATH" "-DSYSTEMD_BINARY_PATH=\"/run/current-system/systemd/lib/systemd/systemd\"" ] ++ lib.optionals stdenv.hostPlatform.isMusl [ "-D__UAPI_DEF_ETHHDR=0" ] ); doCheck = false; # fails a bunch of tests # trigger the test -n "$DESTDIR" || mutate in upstreams build system preInstall = '' export DESTDIR=/ ''; mesonInstallTags = lib.optionals buildLibsOnly [ "devel" "libudev" "libsystemd" ]; postInstall = lib.optionalString (!buildLibsOnly) '' mkdir -p $out/example/systemd mv $out/lib/{binfmt.d,sysctl.d,tmpfiles.d} $out/example mv $out/lib/systemd/{system,user} $out/example/systemd rm -rf $out/etc/systemd/system # Fix reference to /bin/false in the D-Bus services. for i in $out/share/dbus-1/system-services/*.service; do substituteInPlace $i --replace /bin/false ${coreutils}/bin/false done rm -rf $out/etc/rpm '' + lib.optionalString (!withKernelInstall) '' # "kernel-install" shouldn't be used on NixOS. find $out -name "*kernel-install*" -exec rm {} \; '' + lib.optionalString (!withDocumentation) '' rm -rf $out/share/doc '' + lib.optionalString (withKmod && !buildLibsOnly) '' mv $out/lib/modules-load.d $out/example '' + lib.optionalString withSysusers '' mv $out/lib/sysusers.d $out/example ''; # Avoid *.EFI binary stripping. # At least on aarch64-linux strip removes too much from PE32+ files: # https://github.com/NixOS/nixpkgs/issues/169693 # The hack is to move EFI file out of lib/ before doStrip run and return it # after doStrip run. preFixup = lib.optionalString withBootloader '' mv $out/lib/systemd/boot/efi $out/dont-strip-me ''; # Wrap in the correct path for LUKS2 tokens. postFixup = lib.optionalString withCryptsetup '' for f in bin/systemd-cryptsetup bin/systemd-cryptenroll; do # This needs to be in LD_LIBRARY_PATH because rpath on a binary is not propagated to libraries using dlopen, in this case `libcryptsetup.so` wrapProgram $out/$f --prefix LD_LIBRARY_PATH : ${placeholder "out"}/lib/cryptsetup done '' + lib.optionalString withBootloader '' mv $out/dont-strip-me $out/lib/systemd/boot/efi '' + lib.optionalString withUkify '' # To cross compile a derivation that builds a UKI with ukify, we need to wrap # ukify with the correct binutils. When wrapping, no splicing happens so we # have to explicitly pull binutils from targetPackages. wrapProgram $out/bin/ukify --prefix PATH : ${ lib.makeBinPath [ targetPackages.stdenv.cc.bintools ] }:${placeholder "out"}/lib/systemd ''; disallowedReferences = lib.optionals (stdenv.buildPlatform != stdenv.hostPlatform) # 'or p' is for manually specified buildPackages as they dont have __spliced (builtins.map (p: p.__spliced.buildHost or p) finalAttrs.nativeBuildInputs); passthru = { # The `interfaceVersion` attribute below points out the incompatibilities # between systemd versions. When the new systemd build is # backwards-compatible with the previous one, then they can be switched at # runtime (the reboot being optional in this case); otherwise, a reboot is # needed - and therefore `interfaceVersion` should be incremented. interfaceVersion = 2; inherit withBootloader withCryptsetup withEfi withHostnamed withImportd withKmod withLocaled withMachined withPortabled withTimedated withUtmp util-linux kmod kbd ; tests = { inherit (nixosTests) switchTest systemd-journal systemd-journal-gateway systemd-journal-upload ; cross = let systemString = if stdenv.buildPlatform.isAarch64 then "gnu64" else "aarch64-multiplatform"; in pkgsCross.${systemString}.systemd; }; }; meta = { homepage = "https://www.freedesktop.org/wiki/Software/systemd/"; description = "A system and service manager for Linux"; longDescription = '' systemd is a suite of basic building blocks for a Linux system. It provides a system and service manager that runs as PID 1 and starts the rest of the system. systemd provides aggressive parallelization capabilities, uses socket and D-Bus activation for starting services, offers on-demand starting of daemons, keeps track of processes using Linux control groups, maintains mount and automount points, and implements an elaborate transactional dependency-based service control logic. systemd supports SysV and LSB init scripts and works as a replacement for sysvinit. Other parts include a logging daemon, utilities to control basic system configuration like the hostname, date, locale, maintain a list of logged-in users and running containers and virtual machines, system accounts, runtime directories and settings, and daemons to manage simple network configuration, network time synchronization, log forwarding, and name resolution. ''; license = with lib.licenses; [ # Taken from https://raw.githubusercontent.com/systemd/systemd-stable/${finalAttrs.src.rev}/LICENSES/README.md bsd2 bsd3 cc0 lgpl21Plus lgpl2Plus mit mit0 ofl publicDomain ]; maintainers = with lib.maintainers; [ flokli kloenk ]; platforms = lib.platforms.linux; priority = 10; badPlatforms = [ lib.systems.inspect.platformPatterns.isStatic ]; # https://github.com/systemd/systemd/issues/20600#issuecomment-912338965 broken = stdenv.hostPlatform.isStatic; }; })